home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19950929-19951130 / 000169_news@columbia.edu_Sat Oct 21 16:37:35 1995.msg < prev    next >
Internet Message Format  |  2020-01-01  |  3KB

  1. Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA11495
  2.   (5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Sat, 21 Oct 1995 12:37:40 -0400
  3. Received: by apakabar.cc.columbia.edu id AA28811
  4.   (5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Sat, 21 Oct 1995 12:37:39 -0400
  5. Path: news.columbia.edu!watsun.cc.columbia.edu!fdc
  6. From: fdc@watsun.cc.columbia.edu (Frank da Cruz)
  7. Newsgroups: comp.protocols.kermit.misc
  8. Subject: Re: Problems using Kermit with PCMCIA Modems
  9. Date: 21 Oct 1995 16:37:35 GMT
  10. Organization: Columbia University
  11. Lines: 49
  12. Message-Id: <46b7kf$s49@apakabar.cc.columbia.edu>
  13. References: <462ql7$pb6@dub-news-svc-6.compuserve.com>
  14. Nntp-Posting-Host: watsun.cc.columbia.edu
  15. Apparently-To: kermit.misc@watsun.cc.columbia.edu
  16.  
  17. In article <462ql7$pb6@dub-news-svc-6.compuserve.com>,
  18. Rich Godlewsky  <76412.156@compuserve.com> wrote:
  19. : We are unable to connect to a remote site calling in to kermit when we 
  20. : are using a PCMCIA modem on a laptop (e.g., Hayes OPTIMA 144 +FAX for 
  21. : PCMCIA).  Although we are able to use the same modem to connect to 
  22. : CompuServe and even use Kermit to call a remote site and transfer a file. 
  23. :
  24. I don't understand.  You're saying that you can use Kermit to call a remote
  25. site and transfer a file, but in the previous sentence you say you can't
  26. connect to a remote site.  Maybe you could be a little more specific about
  27. the two scenarios -- the one where Kermit works and the one where it doesn't.
  28.  
  29. : The problem we have is that we see the word RING but never see CONNECT 
  30. : 9600.  We are using Kermit Version 3.14 and have the same version 
  31. : installed on a desktop PC with a Hayes External Optima 144 + fax modem 
  32. : which has no problems connecting to the remote site.
  33. How are you dialing?  Are you using the DIAL command (macro) together with
  34. a modem script such as ULTRA144.SCR?  (If not, maybe you should be.)
  35.  
  36. If you are saying that the exact same setup (PC OS, Kermit version, modem)
  37. works on a desktop with external modem but does not work on the laptop with
  38. the PCMCIA card, then you probably have PCMCIA / laptop "peculiarities".
  39. Laptops tend to have power-saver and similar features not found in desktop
  40. systems, so that's the first thing to look for.  Second would be interrupt
  41. conflicts on your laptop.  And so on -- all the stuff that is described in
  42. the KERMIT.BWR file on your MS-DOS Kermit 3.14 diskette.
  43.  
  44. One thing to try would be to simply CONNECT to the modem and type the AT
  45. commands yourself, including the dialing (ATDT) command.  After it says RING,
  46. RING, ..., what does it say?  NO CARRIER?  It should give you a message about
  47. why it failed to make the connection.  In fact, if you look in S86, it should
  48. tell exactly why the call failed (look up the code in your Hayes manual).
  49.  
  50. : Another strange item is that when we go into connect mode on the laptop 
  51. : and try to evaluate registers on the modem (e.g., ATS0 or ATS86) or 
  52. : execute any command we get "+++ ATH0" back and not the contents of the 
  53. : register.
  54. Kermit is not sending that string (unless you have invoked the ATHANGUP
  55. macro), and you are not typing it.  Therefore, I can only speculate that there
  56. is some other software on your laptop that is trying to use the modem at the
  57. same time as Kermit.
  58.  
  59. : We also converted MSKERMIT.INI and MSCUSTOM.INI to be all upper case.
  60. This should have no effect at all.
  61.  
  62. - Frank